1.0
General
1.1
Generally,
the use of candles, incense, potpourri and other open flame devices such as
lamps and lanterns, is prohibited in the University’s academic buildings,
offices, residence halls and housing.
1.2
However,
candles and open flame devices may be used subject to certain restrictions.
2.0
Restrictions
2.1
Candles
and / or open flame devices are limited to use during a religious, cultural,
social or honorary event, as well as any catered function.
2.2
An
‘Open Flame Permit’ (Section 7: Forms) must be obtained from the Building
Coordinator at least ten (10) days before said ceremony or function is to be
held.
2.2.1
A
copy of the permit will be sent to the University’s Environmental, Health,
Safety and Hazardous Waste Office.
3.0
Guidelines
3.1 Approval will be granted for specific dates, times, and locations.
3.2
Candles and/or open flame devices must be
under constant supervision, not unattended while burning.
3.2.1
An approved fire extinguisher shall be
immediately available in the area and a person will be present who has been
trained in its use, serving as a fire watch.
3.3
Candles and/or open flame devices shall be
lit only during the ceremony or function.
3.3.1
Flames will be immediately extinguished at
the conclusion of the ceremony or function.
3.4
Candles and/or open flame devices must be
kept in stationary, securely supported non-combustible
holders.
3.5
No
candle or open flame device shall be placed in a polystyrene holder or
decoration.
3.6
Candles and/or open flame devices must not
be placed on windowsills or other areas that are unstable; or, where they could
come into contact with curtains or other hanging objects.
3.7
Candles and/or open flame devices will not
be permitted in areas where occupants are standing in aisles or
exits.
3.8
Readily combustible materials, including
draperies and curtains, must be secured at least three (3) feet from an open
flame.
3.9 Candles and/or open flame devices must not be used in close proximity to heat or smoke detectors or sprinkler heads in such a way that the heat or smoke might activate the device.